While you are driving, your vehicle constantly monitors sensors throughout the car to ensure that everything works as intended. One of the systems being monitored is the anti-lock braking system (ABS). The ABS monitors the wheels to make sure that they are all turning at approximately the same speed. The system can then use the brakes to keep the vehicle under control during slippery situations. The uses sensors at each wheel to monitor their rotational speed. A computer monitors the signals from all four wheels and the position of the brake pedal to make sure that the vehicle is stable and under control. If the computer notices any abnormal signals, or the lack of a signal from any of the sensors, it will turn the ABS light on, to alert the driver of an issue. In addition to monitoring the wheel speed sensors, the computer can turn the ABS light on for other reasons like low brake fluid levels or a blown fuse. Some ABS systems may flash the light a few times and then leave it on constantly.
The number of flashes refers to a trouble code and can help you identify the issue. Refer to the vehicle repair guide or information online to determine what your ABS system is telling you when it flashes. When the ABS light comes on, the first thing you should do is find a safe place to stop the vehicle, shut it off, and then start it up again. This will make the computer recheck all of the sensors for any abnormalities. Just like your computer at home, doing a simple reset may fix the issue and the light will shut off. Unfortunately, most of the time itвs not this easy and there may be something wrong in the system that needs to be identified. Your best option is to have a certified technician hook a scan tool up to the car and
that are present. There are a few things you can check at home if you have some tools handy. You can remove the wheels to inspect the wheel speed sensors and wires for any damage.
Double check to make sure that the fuse for the ABS system hasnвt blown either. Keep in mind that replacing a blown fuse is only a temporary fix and the fuse will likely blow again at some point. You will need to identify what is causing the fuse to blow in order to fix the issue entirely, and a scan tool will most likely be necessary. Is it safe to drive when the ABS light comes on? Keep in mind that the vehicle may still be okay to drive even when the. Unless there are other brake warning lights on along with the ABS, you will still have normal braking capabilities. The vehicle wonвt be able to assist you in the event of skidding however, so take extra care when driving. The vehicle should not be driven if you feel any loss in braking power when this light is on. In this case, have the vehicle towed to a shop or have one of our certified technicians come to you to help. The helps the on your vehicle to maintain contact with the road while you are braking.
It functions by preventing the wheels from locking up, which can result in. The main purpose of ABS is to improve vehicle control under heavy braking, especially on loose or slick surfaces. It does not necessarily to decrease stopping distance, although it can help. The ABS system does a self-test every time you turn on the ignition. Once you start your vehicle, the light will briefly come on, and if the computer finds a problem, the light will stay on. If you notice the light flash immediately after starting the vehicle, then it\’s just your vehicle doing a self-check. If the warning light comes on while you are driving, it means the. Your brakes will still work, but the ABS might not engage if you need to make an. If the light remains on, you need to as soon as possible. Since the ABS helps with vehicle control and stopping distances, it is an important safety feature to maintain в you never know when you\’ll need it.
If both the ABS and come on at the same time, your vehicle is no longer safe to drive. This means there is a serious problem with the, and continuing to drive puts yourself and others at risk of a car crash. As you are braking heavily and your ABS engages, you will notice the. This is completely normal and it means the ABS system is working normally. The ABS works with your braking system to creating this pulsating so the wheels do not lock up. Once you feel this pulsating, keep your foot on the brake pedal and let the ABS system do the work for you. All you need to do is concentrate on steering safely. Driving with the ABS Light on is not a good idea because it means your ABS is not working properly. This means your vehicle may not handle like it is designed to under heavy braking. If both your ABS Light and brake system light come on, this is an emergency and you need to stop driving right away. by a certified mechanic, such as one from YourMechanic.